2500

Click here for help on hand orientation?

Check out the NEW Double Magholder Carrier

made in america
lifetime warranty
conceal carry


  • Description
  • Product Specs
  • Videos
  • Shipping

Mag Holder for Springfield Magazines

The Magholder has been the mag pouch of choice for Springfield pistol owners! Legendary pistols like the XDS 9 magazines, XDS 45 magazines, 1911 magazines, XD and XD-m magazines, 1911 EMP magazines and the new SA-35 magazines are all supported with a quality and top rated spare mag pouch from Magholder.

The Magholder is a high temperature and high impact nylon similar to a rifle stock. Extremely durable and near break proof this new version has been designed with state of the art technology.

Mag Pouch for EDC

The Magholder is designed to be worn horizontally. Magazine carriers keep you prepared by providing an additional magazine with extra ammunition, as well as an additional magazine in case of a firearm jam or malfunction. This mag holder has been designed to keep your spare magazine concealed along your belt and within arms reach in sitting or standing positions. Upgrade your EDC by concealing your spare mag to blend in with your belt. 

Orientation of your Magholder

Configurable options include Left or Right orientation, referring to which hand you will use to grab your spare magazine. Typically, the shooter reaches for their spare mag with the support hand, sweeping it out of the magazine holster either to the rear from the weak side, or from across the front midline in a crossdraw motion. Both positions are extremely fast but the crossdraw position allows access to the magazine from a sitting position, such as in a vehicle or theater seat.

If you are a right handed shooter, you will likely grab your spare mag with your left hand, and thus, use the "Left Side to the Rear" version MagHolder.

If you are left handed, you will likely grab your spare magazine with your right hand, or the "Right Side to the Rear" version MagHolder.

There are many positions on the belt the MagHolder can be worn, so be imaginative and don't hesitate to contact us at store@magholder.com with any questions. Or check out our "Do I need a right hand or left hand version?" article. If you have special requirements, like bullets pointing upwards, or wearing the MagHolder behind your back, shoot us a message and we will respond quickly!

  • Designed for a friction fit on Springfield pistol magazines
  • Fits a belt that is 1 3/4" or smaller
  • Horizontal magazine carrier or magazine pouch (read Why Horizontal?)
  • Ultimate concealed carry spare magazine holder
  • High temperature and high impact nylon, similar to a rifle stock
  • Designed with state of the art technology
  • Made in America
  • Lifetime Warranty

We ship all orders within 1-2 business days. Currently we ship using the United States Postal Service. If you need us to use another shipping service please reach out to us and let us know once you place your order. All Magholders are shipped in a padded envelope that protects the product during shipping.



Customer Reviews

Based on 12 reviews Write a review

Customer Reviews

Based on 24 reviews
63%
(15)
29%
(7)
4%
(1)
0%
(0)
4%
(1)
s
sidspappy
It works…

Had good experience previously with a Shield magholder, top shelf that one.
This item in question, though is noticeably lower quality. It’s supposed to be for my XDS, but it’s simply a modded 1911 carrier (even says so on the molding), the notches for the 1911 mag catch holes were filed off and my mag is only held in with friction. It’s like some dude went at it in his garage and sold it to me.
Still, as clunky as it is, I admit it functions as advertised. I just wish it wasn’t so poorly presented as a product.

S
Sunny D.
Very nice proof of concept, no retention however, 10mm XDM-E

Excellent proof of concept however the tensioned tab that is supposed to go in the magazine retention hole does not work as Springfield's holes are on the front. Therefore the magazine just slides out when empty or full. I place a square of adhesive backed neoprene in the mag holder and that works for several mag changes.

S
Steven Koop
Good as always

I received the Magholder in a timely manner, this is my first one of the new design, It was a little tough to get the magazine to snap into place at first, but has gotten better as I have used it. The quality is what i have come to expect when I purchase a Magholder. The only reason I gave it 4 stars was because I sliced my hand on the sharp edge while reaching into my pocket, so check the edge and file it smooth if it is needed.

k
kelly

great product! comfortable and well concealed.

K
Kevin Reid
Finally found one that I like.

I've been trying to find a good mag holder for my XDS .45 Mod 2 for quite awhile. It seems that every one I have tried was either too loose and did not secure the mag well enough or was too narrow to use at all. Finally, I found this one. It holds the mag very well. Being a somewhat large man, I have had trouble with mags digging into my gut or side which can be uncomfortable and even painful. This mag, being horizontal, is barely even noticeable. I only purchased one to test it out, but I will be putting another order in for more very soon. Thanks for the Help!!

You may also like